Reviews - Ultra Products X3 1000W
Sample Provided by: Ultra Products (By madmat on Mon, Apr-16-2007)

Page 1 -

The other day I walk (OK, stumble) out of the little modshop of horrors and there in a chair minding it's own business sat a package from Ultra. In a word "yoink!!" It was up on the bench being unpacked before it knew what was happening. Inside I was elated to see this:

If that's not cool enough looking a quick look reveals that there's a flap on the top of the box held down by a magnetic clasp.

It outlines all the features and specs of the X3. As a PSU geek here's the specs I'm most interested in:

Let's break this down into a standard table shall we?

Ultra X3 +3.3V +5V +12V -12V +5VSB
Max Output 24A 28A 70A 0.8A 3A
Max Combined Watts 160W 840W 9.6W 15W
1000W

Pretty impressive isn't it? A single 70 amp 12V rail means that you've got a lot of leeway as to how you connect your accessories. If you only have one video card but you have twenty drives there's no worry about tripping the OCP for the rail the drives are on since they're all on the same rail. Wait...did I say twenty drives? Yes I did but will the X3 run twenty drives? Let's find out.

 

Type of connector: Ultra X3
ATX connector 24 pin
2 x 2 12V connectors 1
8-pin Xeon/EPS connector 1
6-pin Xeon/AUX connector 0
2 x 3 PCIe 4
2 x 4 PCIe 2
5.25" Drive connectors 10
3.5" Drive connectors 2
SATA Drive power connectors 10
Fan only connectors (12V only) 3

 

So, yes, in theory it is capable of supporting twenty drives but it's not really possible since to do so would require you to plug in all the drive cables and that's seven cables with a Molex interface and two cables with a five pin interface for SATA drives with a full fifteen pins. Unfortunately though there are only six Molex interfaces on the body of the X3 which loses you one drive. Although... two of the Molex cables do have 3.5"drive power plugs in addition to the Molex power connectors so push come to shove you can power twenty one drives.

One nice thing about the X3 is that it has native support of the upcoming 8 pin PCI-e standard. No adaptors needed for this baby although as of now the 8 pin cables feed off a 6 pin plug on the unit. A little birdie tells me that Ultra has a redesign in the works which will put the 8 pins on native 8 pin plugs on the PSU body and two of the 6 pin cables will adapt down from them instead of it being the inverse as it is now. Does it make much of a difference? Not really owing to the fact that as of now the extra two pins on the 8 pin plugs are grounds. There's all this hoopla over the 8 pin handling more wattage when in fact there are still three 12V power leads and five grounds rather than three +12V and three grounds. The new standard will eventually implement a 12V sense where the new grounds reside. How this equals more power capacity I really don't understand but I suppose that better minds than mine have decided it will work so that's all that matters.

 

I'd like to point out that of the ten SATA power connectors five are native with 3.3V, 5V and 12V plus grounds. The other five are adapted over from Molexes. It doesn't mean much right now but when SATA drives start requiring the 3.3V line you'll end up limited to five SATA drives. Hopefully that won't happen any time soon.

Also under the flap we find a look at the X3's modular interface. I really like Ultra's approach to the modular interface in that it's solidly a no brainer. You can't accidentally plug the PCI-e cables into the drive ports or vice versa. It's very intuitive for the end user and helps prevent any accidents for the fledgling PC builder due to lack of familiarity with building personal computers.

Inside the red sleeve we find the actual box containing the X3. It's big, it's bad and it's black with the stylized X3 logo and the wattage for the unit. There's no mistaking the 1000 watts of whoop-ass enclosed within this box.

The front and top of the box are nondescript but lifting the lid reveals...

Another box again emblazoned with the X3 logo. Lifting the lid on this box reveals the cables and user manual and warranty card.

 

Under the card and manual are the cables and four screws plus the power cord.

Unlike the X2 the cables for the X3 are basic black and I must say it's very slimming ;-)

Under the box for the cables we finally find the X3 in a bag and suspended in medium density foam end caps. There's also a bag of desiccant to help stop corrosion during the long trip to the states and storage on store shelves.

Once out of the box we see that the X3 is a sexy beast. It's finished in a very bright and reflective black titanium finish. Quite the looker. Make no mistake about it, this isn't your basic black paint job. This is a black metal finish of the plated variety and it's crazy reflective.

Oh yeah baby, we're going to break some seals!

First though I'm going to finish showing you the exterior of the unit, the cables and then show what the X3 brings to the table performance wise. After that we'll club a baby seal, no wait, we'll tear this baby down and see what it's made of. PETA can put away their picket signs.


 

JonnyGURU Feeds
Add our RSS feeds to your favorite RSS Reader or homepage.

JonnyGURU Reviews
AddThis Feed Button

JonnyGURU News
AddThis Feed Button

JonnyGURU Articles
AddThis Feed Button

JonnyGURU Forums
AddThis Feed Button

Follow us onFollow Us!
 
Site-Info | Affiliates | Contact Us | Site-Map
Copyright © 2012 - JonnyGURU.com