C2d E4300

[CAD4466HK]

Not as good as one would of thought, being a C2D and all

http://www.bit-tech.net/hardware/200...o_e4300/1.html

[Kab]

Thats a very low spec but heck its oc'able

[Bipidri]

when they state it is FSB=200MHz does it mean it's preset a that frequency when socketed ?

I ask 'cause today a college friend mentionned OC'ing that E4300 to 3 gigahertz... now I wonder if 1°it's true 2°if so, is it stable for 24/7

[Kab]

Yes thats the frequency the Front Siide Bus runs at which carries all the signals to and from the processor connecting with other devices.

It will be FSB x Multiplier = Clock Frequency

So 200MHz x 9 = 1.8GHz

• E6300 = 1.86GHz stock clock, 7x multiplier, 266MHz FSB
• E4300 = 1.80GHz stock clock, 9x multiplier, 200MHz FSB

Yeah because it has a low stock FSB and multiplier and most motherboards out there will support 333MHz, simple OC is easy:

333 x 9 = 2997MHz

[PaulTa]

I was about to post the same damned article in the hope that I could ease CAD out of the news market and take a little over for myself...

[CAD4466HK]

Originally Posted by PaulTa

I was about to post the same damned article in the hope that I could ease CAD out of the news market and take a little over for myself...

Fat chance, Padawan learner