jonnyGURU Forums
Home Site Search Reviews Articles Contest Links PSU FAQs  


Go Back   jonnyGURU Forums > Computer Hardware > PC Power Supply Discussion

PC Power Supply Discussion Troubleshooting and discussion of computer power supplies

Reply
 
Thread Tools Display Modes
  #11  
Old 02-07-2007
Kab Kab is offline
Retired from Boards
 
Join Date: Feb 2007
Location: Roll around the world
Posts: 697
Thanks: 0
Thanked 0 Times in 0 Posts
Default

The single rail will do just fine! You don't lose power to any component and distribution is easier with less upgrade problems as long as you have some headroom in power to go.
The problems with multiple 12v rails is how to matchup and divide the power up. Sometimes the PSU's are designed too bad for effective running throwing out way too much substantial amperages single handedly to the CPU etc, whereas they're needed more for the GPU.
The tri rails are pretty nifty if the right connectors are divided up nicely, where you can run a dual/quad core and other h/ware off a 3rd 12v rail and 2x12v rails to pump any SLI setup single handedly (if required).

Looking at your rig with just a single 8800GTX, you won't be needing that much at all to worry about single/multiple rails. Anything that can provide solid needed amperage on the 12V, efficient at continuous higher temps and loads, well cooled with lower ripple and good stability on the rails under average and full load will do you just fine. Just have your system well cooled and monitored.

I ran a Seasonic S12 650W with a Kentsfield OC'd to 3.65Ghz and over 1GHz 2Gb DDR2 Twin2x2 RAM perfectly for a month before moving to the Enermax Galaxy 1KW. Am considering moving to the Andyson 1KW unit now depending on how its reviews go.

Everything used to be single railed before Intel decided to chime in and restrict the specs to ATX12v = 20A each rail for safety. Still the major players didn't give a bag of hoots and decided to load up single rail PSUs all the way to the 80Amp markers And yes, they work perfectly in desktops systems for many individuals and hardcore h/ware OC'ers. I have a feeling this trend may reverse back after some head on battles and evaluation, back to the single rails or maybe something different.

I haven't read any FAQs by Jon or anyone on this site, but I'm certain if others on many sites have given thorough reads and good explanations, his wouldn't be anywhere but near the top of all you need to know or understand.
Reply With Quote
  #12  
Old 02-08-2007
PaulTa's Avatar
PaulTa PaulTa is offline
Flux Capacitor User
 
Join Date: Dec 2006
Posts: 511
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Yeah, I've read a bunch on it lately. I'm not worried about performance difference anymore, but I am interested in the technical explination of what's going on.

I might try researching that independently.
Reply With Quote
  #13  
Old 02-08-2007
jonnyGURU's Avatar
jonnyGURU jonnyGURU is offline
Site Founder
 
Join Date: Oct 2006
Location: jonnyGURU forums, of course!
Posts: 15,300
Thanks: 489
Thanked 1,995 Times in 1,236 Posts
Default

Quote:
Originally Posted by PaulTa View Post
Yeah, I've read a bunch on it lately. I'm not worried about performance difference anymore, but I am interested in the technical explination of what's going on.

I might try researching that independently.
I'm at a loss. I don't see what part of that hasn't been explained.

The only difference is: One PSU has a circuit board that has "limiters" known as "OCP's" often in the form of an IC that are "programmed" to a certain current limit in between the source of the 12V and the output connector(s.) The other PSU does not have these limiters.

That's it.

So when you hear one of us refer to a PSU that has been "modified to a single 12V rail" (like the Turbo-Cool 1kW or the Silverstone OP1000) that means they removed that circuit with the OCP and took the +12V leads that went into that circuit and soldered them all together into one "rail."
__________________
Rest in peace Mike Clements, aka "Yellowbeard"

Rest in peace Joerg Theissen, aka "GI Joe"
Reply With Quote
  #14  
Old 02-08-2007
PaulTa's Avatar
PaulTa PaulTa is offline
Flux Capacitor User
 
Join Date: Dec 2006
Posts: 511
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by jonnyGURU View Post
I'm at a loss. I don't see what part of that hasn't been explained.

The only difference is: One PSU has a circuit board that has "limiters" known as "OCP's" often in the form of an IC that are "programmed" to a certain current limit in between the source of the 12V and the output connector(s.) The other PSU does not have these limiters.

That's it.

So when you hear one of us refer to a PSU that has been "modified to a single 12V rail" (like the Turbo-Cool 1kW or the Silverstone OP1000) that means they removed that circuit with the OCP and took the +12V leads that went into that circuit and soldered them all together into one "rail."
Sweet. That clears up the one question I still had lingering.

Thanks Jonny.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Multiple rails ashiekh PC Power Supply Discussion 6 06-18-2018 10:47 PM
Single vs. Multiple +12V rails: The splitting of the +12V rail jonnyGURU PC Power Supply Discussion 184 08-01-2013 03:38 PM
what need is there for multiple 12v rails? chopficaro PC Power Supply Discussion 2 03-20-2009 09:21 PM
+12V Rail vs +5V Rail and Split Rails farfromhome PC Power Supply Discussion 3 09-01-2007 10:52 PM
SS DA750 quad rails or single rail actually? wedfighter PC Power Supply Discussion 7 04-12-2007 02:32 PM


All times are GMT -4. The time now is 11:27 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright © JonnyGURU.com 2000 -