jonnyGURU Forums
Home Site Search Reviews Articles Contest Links PSU FAQs  


Go Back   jonnyGURU Forums > Computer Hardware > General PC Hardware

General PC Hardware Troubleshooting and discussion of any computer hardware. Includes UPS's and monitors.

Reply
 
Thread Tools Display Modes
  #1  
Old 12-05-2018
ashiekh's Avatar
ashiekh ashiekh is offline
20W User
 
Join Date: Oct 2017
Location: Grand Junction, CO
Posts: 1,431
Thanks: 53
Thanked 102 Times in 93 Posts
Default Sleeve bearings

Sleeve bearing fans seem to get a bad rap, but I have a house full of room fans, and find even when new they have very little lubricant; but I pull them apart, add oil, and find they now run indefinitely. I have one that runs 8-12 hours a day and is still doing fine after more than 10 years; then again I do run it slow on a variac.

One trick to check the bearings is to rotate the fan and see that the fan blades do not follow.

I have also seen no failures in my sleeve bearing computer fans after I have them well oiled.
Reply With Quote
  #2  
Old 12-05-2018
Tator Tot's Avatar
Tator Tot Tator Tot is online now
Danke schön
 
Join Date: May 2010
Location: Missouri; USA
Posts: 4,984
Thanks: 401
Thanked 509 Times in 367 Posts
Default

Sleeve bearings have a bad rap because:


1.) Production Inconsistencies
2.) They need maintenance much earlier in life than competing bearings
3.) The basic design flaw that if you don't seal the oil chamber they will leak out lubricant if they're horizontally mounted.

4.) Rifle Bearings cost about the same and are just better.





As you have experienced though, a sleeve bearing can last a long time as long as they are cared for properly.
__________________
Rig Specs
Reply With Quote
The Following User Says Thank You to Tator Tot For This Useful Post:
ashiekh (12-05-2018)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Spring loaded ball bearings ashiekh General PC Hardware 0 10-24-2018 06:02 PM
How much better is a Maglev Fan vs a FDB or Sleeve fan? Schofts General PC Hardware 11 12-21-2017 10:33 AM
Cryorig Fan Bearings Tator Tot General PC Hardware 17 11-04-2017 05:10 PM
Corsair RM750i sleeve Dopaaa PC Power Supply Discussion 20 09-11-2017 07:56 AM
Can I use black duck tape to sleeve cables? Shift PC Power Supply Discussion 20 10-30-2006 06:22 PM


All times are GMT -4. The time now is 10:42 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright © JonnyGURU.com 2000 -