Quote Originally Posted by 370forlife View Post
I would pop it open and take a look at the caps, as long as it's out of warranty. They sound like the culprit as when caps warm up, their ESR goes down. I.E. when they are cold their ESR is too high and causes the missing lines, then as they warm up they come back down to a lower (but probably still too high, just enough to not cause errors) ESR.
That is probably the cause, as something is amiss.
But, I am not keen to try and take it apart, as knowing my luck I would break something.
As long as the lines disappear after a short time, even though they seem to be breeding, I will leave things alone.
Apparently quite a few people have this 'problem', but I just hope the monitor soldiers on for quite some time.
Thanks for the interest....