https://www.tomshardware.com/uk/revi...-supply-review
Based off the second generation Seasonic Focus Plus Gold (GX).
1kW User
Phanteks AMPS Series 550W Power Supply Review @ Tom's Hardware UK
https://www.tomshardware.com/uk/revi...-supply-review
Based off the second generation Seasonic Focus Plus Gold (GX).
Site Founder
It's on their main site too: https://www.tomshardware.com/reviews...-supply-review
hello_there_123 (11-29-2019), Philipus II (11-29-2019)
3.7W at idle
How Seasonic changed inrush current protection stage? Former generation Focus also uses Hongfa relay for it.
Last edited by vvvpcf; 11-29-2019 at 08:57 AM.
Cybenetics CTE
Yes true, I probably missed that because of an early sample that I had in mind.
200W User
Why transient response is so bad in seasonic platforms. Its caused maybe because of full bridge or wrong calculated circuit somewhere?
1kW User
Are they though?Originally Posted by psupply
Sure, the +3.3V rail did go out of ATX spec on certain transient loads. But the most important (some might say the only important) rail, +12V, passed with flying colors on the transient testing, and the +5V rail stayed well within spec.
200W User
yes, but still it went except norms, so it's a little bit weird. it has to be something wrong. just look on corsair rmx and transient response there...
Posting Permissions
Reply With Quote