200W User
Using the cables from HX750W (2009) with SF600 Platium?
Hi everyone!
I want to use the SF600 with my new PC. The case will be a Fractal Nano S.
The problem is that with every SFX PSU the CPU cable is not long enough to pass behind the motherboard.
So I was thinking about using the CPU cable I still have from my HX750W from 2009 (CMPSU-750HXEU).
Do you know if the cable is compatible, and maybe how to check if the cable is working fine?
ssssssmokin'
200W User
How can I know the exact model of my cable?
ssssssmokin'
You don't need to, you have an old HX. The "Original HX series" in the table, the ones with the grey dots.
A Beautiful Lie
The chart says the HX uses a fixed 8Pin, so how is it you're trying to trade it onto an SF if it can't be removed??? SF uses a Type4 CPU 8pin, buy the longer Type4 if you need a longer cable than what it comes with, or get the Type3 (without inline capacitors) --> https://www.corsair.com/eu/en/Catego...U/p/CP-8920141
Surfin' with the Alien
200W User
Not sure why it say that it has fixed cpu cable. My HX is full modular.
I'll try to check the cable code if there is one and in worst case I'll buy a ew cable!
ssssssmokin'
It won't work, as the table already shows.
Tinfoil Hat User
UmOriginally Posted by Ansem1
https://www.corsair.com/us/en/Catego.../p/CMPSU-750HX
https://www.overclock3d.net/reviews/...750w_atx_psu/2
It's clearly semi-modular, with ATX and EPS cables fixed.
Site Founder
I don't think OP is getting his part number correct. Maybe he's not reading it off the PSU itself.
If it's a fully modular HX, it will work.
If it's a semi-modular HX, it's not.
But if it's a fully modular HX, it's not CMPSU-750HX. It's a CP-9020137 and it's not "old" (not rom 2009).
Flux Capacitor User
Could you provide a pic from the Modular Panel side or where you can see the modular panel of the PSU?
Posting Permissions
Reply With Quote