Results 1 to 2 of 2

Thread: Sleeve bearings

  1. #1
    Join Date
    Oct 2017
    Location
    Grand Junction, CO
    Posts
    1,823
    Thanks Thanks Given 
    94
    Thanks Thanks Received 
    31
    Thanked in
    29 Posts

    Default Sleeve bearings

    Sleeve bearing fans seem to get a bad rap, but I have a house full of room fans, and find even when new they have very little lubricant; but I pull them apart, add oil, and find they now run indefinitely. I have one that runs 8-12 hours a day and is still doing fine after more than 10 years; then again I do run it slow on a variac.

    One trick to check the bearings is to rotate the fan and see that the fan blades do not follow.

    I have also seen no failures in my sleeve bearing computer fans after I have them well oiled.

  2. #2
    Join Date
    May 2010
    Location
    Missouri; USA
    Posts
    5,049
    Thanks Thanks Given 
    410
    Thanks Thanks Received 
    11
    Thanked in
    8 Posts

    Default

    Sleeve bearings have a bad rap because:


    1.) Production Inconsistencies
    2.) They need maintenance much earlier in life than competing bearings
    3.) The basic design flaw that if you don't seal the oil chamber they will leak out lubricant if they're horizontally mounted.

    4.) Rifle Bearings cost about the same and are just better.





    As you have experienced though, a sleeve bearing can last a long time as long as they are cared for properly.

  3. The Following User Says Thank You to Tator Tot For This Useful Post:

    ashiekh (12-05-2018)

Similar Threads

  1. Spring loaded ball bearings
    By ashiekh in forum General PC Hardware
    Replies: 0
    Last Post: 10-24-2018, 06:02 PM
  2. How much better is a Maglev Fan vs a FDB or Sleeve fan?
    By Schofts in forum General PC Hardware
    Replies: 11
    Last Post: 12-21-2017, 10:33 AM
  3. Cryorig Fan Bearings
    By Tator Tot in forum General PC Hardware
    Replies: 17
    Last Post: 11-04-2017, 05:10 PM
  4. Corsair RM750i sleeve
    By Dopaaa in forum PC Power Supply Discussion
    Replies: 20
    Last Post: 09-11-2017, 07:56 AM
  5. Can I use black duck tape to sleeve cables?
    By Shift in forum PC Power Supply Discussion
    Replies: 20
    Last Post: 10-30-2006, 06:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •