Results 1 to 3 of 3

Thread: Ripple Measurement

  1. #1
    Join Date
    Nov 2014
    Posts
    4
    Thanks Thanks Given 
    2
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default Ripple Measurement

    Hi folks. I've gathered all the equipment for the power supply for a short time. My first victim HX750i. I did all test and last test ripple measurement. But I think it's a problem with measurements. Especially 12V channel.

    OSC Rigol 1054z(Hacked 100 MHZ) I build own DC Load and Text Fixture. I followed intel atx spec.

    http://i.imgur.com/rIEJDVE.jpg
    http://i.imgur.com/RWILBl1.jpg

    Channel 1 -12V- Channel 2 -5V- Channel 3 -3.3V- Channel 4 -5VSB-
    PSU OFF

    http://i.imgur.com/3iwlOS2.png

    %0 Load

    http://i.imgur.com/FHhZcHX.png

    %10 Load

    http://i.imgur.com/YbcmrmE.png

    %20 Load

    http://i.imgur.com/39FWESP.png

    %30 Load

    http://i.imgur.com/Rdk9bHH.png

    %40 Load

    http://i.imgur.com/nC3cqk0.png

    %50 Load

    http://i.imgur.com/ZRc19yu.png

    %60 Load

    http://i.imgur.com/hnzpF6n.png

    %70 Load

    http://i.imgur.com/vSITJZG.png

    %80 Load

    http://i.imgur.com/hT1VpqQ.png

    %90 Load

    http://i.imgur.com/OGZMpHp.png

    %100 Load

    http://i.imgur.com/KFeEDrI.png

    %110 Load

    http://i.imgur.com/i2sY3pt.png



    CL 1

    http://i.imgur.com/d0y3F0S.png

    CL 2

    http://i.imgur.com/TIBfTZV.png

    What are you thinking? Have you observed an abnormal condition in the results?

  2. #2
    Join Date
    Jan 2010
    Location
    Greece
    Posts
    1,542
    Thanks Thanks Given 
    191
    Thanks Thanks Received 
    22
    Thanked in
    13 Posts

    Default

    Its switching controller operates at Missing Cylce (MC) mode under light loads and this increases ripple during your 10% test. However as it seems you should calibrate your loads since your 10% load is actually lower, because I didn't have this ripple in my HX750i sample with true 10% load. Else in your sample the controller is tuned slightly different since with the use of the proper circuit its MC mode can be adjusted. I have also noticed this in the HX1000i review and in general most LLC topologies have it under light loads.

    https://www.techpowerup.com/reviews/...HX1000i/9.html

  3. The Following User Says Thank You to crmaris For This Useful Post:

    OneTreeHill (03-16-2017)

  4. #3
    Join Date
    Oct 2017
    Location
    Grand Junction, CO
    Posts
    2,806
    Thanks Thanks Given 
    195
    Thanks Thanks Received 
    110
    Thanked in
    100 Posts

    Default

    Quote Originally Posted by OneTreeHill View Post
    I build own DC Load and Text Fixture. I followed intel atx spec.

    I know I should not bump an old thread, but is the load resistive?

Similar Threads

  1. Exploding hold-up time measurement
    By crmaris in forum PC Power Supply Discussion
    Replies: 7
    Last Post: 04-24-2016, 03:47 PM
  2. Best 850 (ish) PSU as far as ripple?
    By vafan13 in forum PC Power Supply Discussion
    Replies: 11
    Last Post: 11-29-2015, 05:17 PM
  3. On ripple
    By rafal_iB_PL in forum PC Power Supply Discussion
    Replies: 7
    Last Post: 01-27-2011, 10:19 AM
  4. A question about ripple measurement
    By burebista in forum PC Power Supply Discussion
    Replies: 17
    Last Post: 04-10-2008, 08:47 AM
  5. How do you reduce ripple?
    By kimandsally in forum Electronic Component Discussion
    Replies: 34
    Last Post: 03-07-2007, 04:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •