Results 1 to 10 of 30

Thread: Test methodology

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jul 2015
    Location
    Croatia
    Posts
    70
    Thanks Thanks Given 
    12
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default Test methodology

    Considering that in Croatia there is no quality review of PSU, I started testing with the PSU that is available in our market, mostly cheap one. I still have a lot of things missing (equipment), there are plenty of room for improvement but it will be... In the last test I compared the LC Power vs EVGA. Critiques, recommendations and advice are welcome.
    After the first test I saw that my test methodology does not match with most of that work and tests. I double checked but ..... first thing first....
    Ripple & Noise (PARD) - If I'm not mistaken ripple is mainly tested the ms range. I do not understand why, since the frequency of switch is substantially higher, suits us range?!
    Last edited by ITelektro; 10-18-2015 at 06:59 PM.

Similar Threads

  1. need to test UPS, any safe electronic inside house for load test?
    By Testakraze in forum PC Power Supply Discussion
    Replies: 5
    Last Post: 11-07-2013, 02:53 AM
  2. PC Perspective Review Methodology
    By shinji2k in forum PC Power Supply Discussion
    Replies: 3
    Last Post: 05-30-2010, 12:54 PM
  3. How is Hi-Pot Test? (Electric Strength Test and Impulse Test)
    By J.O in forum Testing Methodology Discussion
    Replies: 0
    Last Post: 04-08-2009, 10:28 AM
  4. Complete Review Methodology
    By Kab in forum Testing Methodology Discussion
    Replies: 13
    Last Post: 02-26-2007, 05:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •