Page 1 of 3 123 LastLast
Results 1 to 10 of 24

Thread: FS: High quality capacitors for PSUs, displays, TVs, motherboards etc.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Aug 2013
    Location
    50°4'53.169"N, 14°23'30.699"E
    Posts
    1,578
    Thanks Thanks Given 
    90
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default FS: High quality capacitors for PSUs, displays, TVs, motherboards etc.

    Hello everybody!

    I would like to present my constantly expanding offer of high-quality capacitors. I have only the best, no Chinese crap, no Korean crap, only Taiwan caps I have are the good and proven lines of Samxon (Man Yue).

    What I would especially highlight, for many of these parts I am one of a few (or the only one) small-volume resellers in the world! All of them are sold for very competitive prices, usually far below big-ass distributors/resellers.

    Some of the more notable caps (not complete list!):
    • Rubycon MFZ 2700 uF/6,3 V, D10×20 mm - 47/2006, for motherboards, graphics cards etc.
    • Rubycon YXJ 220 uF/25 V, D6,3×11 mm - for PSUs, monitors, motherboards etc.
    • Rubycon LLE 3.3 uF/400 V, D8×11.5 mm - for PSUs, monitors, motherboards etc.
    • Samxon RS 3300 uF/16 V, D10×30 mm - for ATX PSUs etc.
    • Nippon Chemi-Con KZN 3300 uF/16 V, D10×40 mm - for ATX PSUs
    • Nippon Chemi-Con KZN 1500 uF/6,3 V, D8×20 mm - for ATX PSUs, displays etc.
    • Nippon Chemi-Con KZN 100 uF/35 V, D6.3×11 mm
    • Nippon Chemi-Con KY 4.7 uF/50 V, D5×11 mm
    • Nippon Chemi-Con KYA 10 uF/63 V, D5×11 mm
    • Nippon Chemi-Con KYA 3300 uF/6.3 V, D10×25 mm - for ATX PSUs
    • Nippon Chemi-Con KYB 3300 uF/6.3 V, D10×30 mm - for ATX PSUs
    • Nippon Chemi-Con KYB 1500 uF/16 V, D10×20 mm - for displays etc.
    • Nippon Chemi-Con KYB 2200 uF/16 V, D10×20 mm - for ATX PSUs
    • Nippon Chemi-Con KYB 1000 uF/25 V, D10×20 mm - for displays etc.
    • Nippon Chemi-Con KYB 680 uF/35 V, D10×20 mm - for displays etc.
    • Nippon Chemi-Con KZM 47 uF/35 V, D5×11 mm - for small PWM/driving ICs etc.
    • Nippon Chemi-Con KZM 470 uF/6.3 V, D6.3×11 mm - for small SMPS, displays etc.
    • Nippon Chemi-Con KZM 470 uF/16 V, D8×11,5 mm - for small SMPS, displays etc.
    • Nippon Chemi-Con KZM 1000 uF/16 V, D8×20 mm - for ATX PSUs, displays etc.
    • Nippon Chemi-Con KZH 1200 uF/6.3 V, D8×15 mm - for SMPS, displays etc.
    • Nippon Chemi-Con KZH 680 uF/16 V, D8×15 mm - for displays etc.
    • Nippon Chemi-Con KXJ 10 uF/400 V, D10×16 mm - for set-top boxes, satellite receivers, AC-DC adapters etc.
    • Nippon Chemi-Con KXJ 22 uF/420 V, D12.5×20 mm - for set-top boxes, satellite receivers, AC-DC adapters etc.
    • Nippon Chemi-Con KXJ 150 uF/400 V, D18×40 mm - for monitors, TVs, SMPS adapters etc.
    • Nippon Chemi-Con LE 2.2 uF/100 V, D5×11 mm - long life, medium ESR
    • Nippon Chemi-Con LE 22 uF/50 V, D5×11 mm - long life, medium ESR
    • ESR Micro v4.0si ESR, capacitance, low-ohm meter, with unique relay protection from charged capacitors (up to 500 V) and discharge circuit! now with better probes


    You can see my offer and more or less accurate stock overview on my website (this part is in English). Shipping usually goes through airmail and I ship worldwide, as for payment, I accept PayPal, direct bank transfer or cryptocurrencies. If you wish, you can also buy from Bonanza but you will get better prices if you buy from me directly. If you need something, you can post it here, to PM, e-mail, Skype or Jabber.
    Last edited by Behemot; 03-09-2017 at 05:54 AM.

  2. #2
    Join Date
    Aug 2013
    Location
    50°4'53.169"N, 14°23'30.699"E
    Posts
    1,578
    Thanks Thanks Given 
    90
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Some new caps have arrived and will arrive tomorrow/the day after.

    I also have the newest version of SRC Micro, the immortal v4.0si with relay protection and discharge circuit!

  3. #3
    Join Date
    Oct 2006
    Location
    jonnyGURU forums, of course!
    Posts
    15,861
    Thanks Thanks Given 
    525
    Thanks Thanks Received 
    178
    Thanked in
    128 Posts

    Default

    Are they all made in Indonesia or do you know the other countries of origin?

    Not that there's anything wrong with that... This is for my own curiosity.

  4. #4
    Join Date
    Aug 2013
    Location
    50°4'53.169"N, 14°23'30.699"E
    Posts
    1,578
    Thanks Thanks Given 
    90
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    From what I have been told, they are all comming directly from Japan (that does not mean they were not made elsewhere, but why sending them to Japan and back, right) and Japan plants. However, I cannot tell for sure. I have date-codes manual and now one of the letters is for plant name, but I do not know which letter is which factory so

    Anyway the caps I have are F, T, K. T may be TAKAHAGI PLANT, F Fukushima plant, K maybe KDK CORP. Niigata Plant?

    Do you have any idea what series may those caps Super Flower uses based on?

  5. #5
    Join Date
    Oct 2006
    Location
    jonnyGURU forums, of course!
    Posts
    15,861
    Thanks Thanks Given 
    525
    Thanks Thanks Received 
    178
    Thanked in
    128 Posts

    Default

    They're certainly not from Japan. I looked at some of your pictures on eBay and they're definitely made in Indonesia and other countries.

    Actually, it looks like your KYA's are made in China: http://r.ebay.com/h7ydi1



    Don't know about the caps SF uses.

  6. #6
    Join Date
    Aug 2013
    Location
    50°4'53.169"N, 14°23'30.699"E
    Posts
    1,578
    Thanks Thanks Given 
    90
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    TBH I haven't even noticed the country of origin on the boxes. Will ask what those letters mean than…
    _______________________
    The 3,3mF KZN are made in Japan actually

  7. #7
    Join Date
    Aug 2013
    Location
    50°4'53.169"N, 14°23'30.699"E
    Posts
    1,578
    Thanks Thanks Given 
    90
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Just got new Rubycons YXJ 220 uF/25 V, D6,3×11 mm!

  8. #8
    Join Date
    Aug 2013
    Location
    50°4'53.169"N, 14°23'30.699"E
    Posts
    1,578
    Thanks Thanks Given 
    90
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Got some new caps on stock, NCC KZH 680/15 D8×15 and KYB 1000/25 D10×20 instead of KYA as they have lower ESR and higher current.

    More new caps being manufactured!

  9. #9
    Join Date
    Aug 2013
    Location
    50°4'53.169"N, 14°23'30.699"E
    Posts
    1,578
    Thanks Thanks Given 
    90
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    KZH 1000/16 have been restocked (now with flat electrodes), now I have Rubycons LLE 3,3 uF/400 V in D8×11,5 mm! This time straight from Japan.

    KYA 680/35 are sold out, KYB 680/35 in production.

  10. #10
    Join Date
    Aug 2013
    Location
    50°4'53.169"N, 14°23'30.699"E
    Posts
    1,578
    Thanks Thanks Given 
    90
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    All caps have been moved to Bonanza, see the news http://www.hardwareinsights.com/wp/c...one-with-ebay/

    Maybe the most exclusive ones will be re-listed on eBay in time, but I would prefer you using Bonanza if you have to use such service in the first place as you can contact me directly and soon e-shop will be finally started (at least in testing mode).

    As for capacitor news, I am getting some new samples around next week and in a few weeks new models will finally arrive.

Similar Threads

  1. Replies: 3
    Last Post: 01-14-2018, 08:26 PM
  2. Do high quality PSUs really worth it ?
    By Overclocked in forum PC Power Supply Discussion
    Replies: 16
    Last Post: 11-28-2017, 03:38 PM
  3. High-Quality, Low-Wattage PSUs
    By TaroTsujimoto in forum PC Power Supply Discussion
    Replies: 30
    Last Post: 08-12-2015, 07:08 PM
  4. Sanyo OS-CON SEPC Capacitors for Motherboards
    By Super Nade in forum For Sale/Trade
    Replies: 8
    Last Post: 02-16-2010, 04:41 PM
  5. Recognizing capacitors and levels of quality?
    By Sphere in forum Electronic Component Discussion
    Replies: 16
    Last Post: 01-07-2007, 04:35 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •