Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: Multiple rails or one rail? What's the difference?

  1. #11
    Join Date
    Feb 2007
    Location
    Roll around the world
    Posts
    697
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    The single rail will do just fine! You don't lose power to any component and distribution is easier with less upgrade problems as long as you have some headroom in power to go.
    The problems with multiple 12v rails is how to matchup and divide the power up. Sometimes the PSU's are designed too bad for effective running throwing out way too much substantial amperages single handedly to the CPU etc, whereas they're needed more for the GPU.
    The tri rails are pretty nifty if the right connectors are divided up nicely, where you can run a dual/quad core and other h/ware off a 3rd 12v rail and 2x12v rails to pump any SLI setup single handedly (if required).

    Looking at your rig with just a single 8800GTX, you won't be needing that much at all to worry about single/multiple rails. Anything that can provide solid needed amperage on the 12V, efficient at continuous higher temps and loads, well cooled with lower ripple and good stability on the rails under average and full load will do you just fine. Just have your system well cooled and monitored.

    I ran a Seasonic S12 650W with a Kentsfield OC'd to 3.65Ghz and over 1GHz 2Gb DDR2 Twin2x2 RAM perfectly for a month before moving to the Enermax Galaxy 1KW. Am considering moving to the Andyson 1KW unit now depending on how its reviews go.

    Everything used to be single railed before Intel decided to chime in and restrict the specs to ATX12v = 20A each rail for safety. Still the major players didn't give a bag of hoots and decided to load up single rail PSUs all the way to the 80Amp markers And yes, they work perfectly in desktops systems for many individuals and hardcore h/ware OC'ers. I have a feeling this trend may reverse back after some head on battles and evaluation, back to the single rails or maybe something different.

    I haven't read any FAQs by Jon or anyone on this site, but I'm certain if others on many sites have given thorough reads and good explanations, his wouldn't be anywhere but near the top of all you need to know or understand.

  2. #12
    Join Date
    Dec 2006
    Posts
    511
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Yeah, I've read a bunch on it lately. I'm not worried about performance difference anymore, but I am interested in the technical explination of what's going on.

    I might try researching that independently.

  3. #13
    Join Date
    Oct 2006
    Location
    jonnyGURU forums, of course!
    Posts
    15,560
    Thanks Thanks Given 
    505
    Thanks Thanks Received 
    53
    Thanked in
    43 Posts

    Default

    Quote Originally Posted by PaulTa View Post
    Yeah, I've read a bunch on it lately. I'm not worried about performance difference anymore, but I am interested in the technical explination of what's going on.

    I might try researching that independently.
    I'm at a loss. I don't see what part of that hasn't been explained.

    The only difference is: One PSU has a circuit board that has "limiters" known as "OCP's" often in the form of an IC that are "programmed" to a certain current limit in between the source of the 12V and the output connector(s.) The other PSU does not have these limiters.

    That's it.

    So when you hear one of us refer to a PSU that has been "modified to a single 12V rail" (like the Turbo-Cool 1kW or the Silverstone OP1000) that means they removed that circuit with the OCP and took the +12V leads that went into that circuit and soldered them all together into one "rail."

  4. #14
    Join Date
    Dec 2006
    Posts
    511
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Quote Originally Posted by jonnyGURU View Post
    I'm at a loss. I don't see what part of that hasn't been explained.

    The only difference is: One PSU has a circuit board that has "limiters" known as "OCP's" often in the form of an IC that are "programmed" to a certain current limit in between the source of the 12V and the output connector(s.) The other PSU does not have these limiters.

    That's it.

    So when you hear one of us refer to a PSU that has been "modified to a single 12V rail" (like the Turbo-Cool 1kW or the Silverstone OP1000) that means they removed that circuit with the OCP and took the +12V leads that went into that circuit and soldered them all together into one "rail."
    Sweet. That clears up the one question I still had lingering.

    Thanks Jonny.

Similar Threads

  1. Multiple rails
    By ashiekh in forum PC Power Supply Discussion
    Replies: 6
    Last Post: 06-18-2018, 10:47 PM
  2. Single vs. Multiple +12V rails: The splitting of the +12V rail
    By Jon Gerow in forum PC Power Supply Discussion
    Replies: 184
    Last Post: 08-01-2013, 03:38 PM
  3. what need is there for multiple 12v rails?
    By chopficaro in forum PC Power Supply Discussion
    Replies: 2
    Last Post: 03-20-2009, 09:21 PM
  4. +12V Rail vs +5V Rail and Split Rails
    By farfromhome in forum PC Power Supply Discussion
    Replies: 3
    Last Post: 09-01-2007, 10:52 PM
  5. SS DA750 quad rails or single rail actually?
    By wedfighter in forum PC Power Supply Discussion
    Replies: 7
    Last Post: 04-12-2007, 02:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •