View Single Post
  #3  
Old 05-30-2011
jonnyGURU's Avatar
jonnyGURU jonnyGURU is offline
Site Founder
 
Join Date: Oct 2006
Location: jonnyGURU forums, of course!
Posts: 13,842
Thanks: 408
Thanked 1,436 Times in 885 Posts
Default

Yup. And I had multiple connectors plugged into the load tester, of course. The voltages reported were actually the highest of all of the voltage taking into account there would be some resistance.

From page 3:
Quote:
This power supply is supposed to have separate +12V rails, and I have the capability and will load each of these +12V rails. But I will only report the highest +12V voltage for each load as lower voltages can be blamed on the resistance in the cable or connectors.
__________________
Rest in peace Mike Clements aka Yellowbeard

Last edited by jonnyGURU; 05-30-2011 at 12:20 PM.
Reply With Quote