Search:

Type: Posts; User: Overclocked

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. Why do you so concerned about plug or unplug it?...

    Why do you so concerned about plug or unplug it? Plugging and Unplugging are very simple work.
  2. PSU consumes a little power when connected to the...

    PSU consumes a little power when connected to the plug even on stand by mode.
  3. Turn off the PC. Unplug it. These are enough.

    Turn off the PC. Unplug it. These are enough.
  4. Replies
    9
    Views
    2,378

    http://www.jonnyguru.com/forums/showthread.php?t=1...

    http://www.jonnyguru.com/forums/showthread.php?t=14961

    Maybe not. You can see the circuit scheme on this link.
  5. Seems like Coffee Lake CPUs are better choice now...

    Seems like Coffee Lake CPUs are better choice now for gaming.
    I bought Ryzen 1600 because there were no Coffee Lake CPUs. Hmm...
    Just sayin... :)
  6. Here is my DMM measuring results from other...

    Here is my DMM measuring results from other topic. Software readings are not correct.
  7. Beginners are looking for all lists, suggestions,...

    Beginners are looking for all lists, suggestions, reviews. So Tom's one is one of the guide for a beginner. Beginner will not know if it is true or false list about PSUs, right?
  8. Yes, I forgot it for a moment. :) 3.3V is same at...

    Yes, I forgot it for a moment. :) 3.3V is same at everywhere.
    I measured my both old and new PC today.
    Old Pc turned off itself. Probably I made a short circuit with 1 probe. :)
    But I measured...
  9. I read 3.3V via multimeter from sata power...

    I read 3.3V via multimeter from sata power connector. S12 is a single rail PSU. So, measuring 3.3v from sata or 24 pin connector don't make any difference right?
    No problems like bsod etc. Pc is...
  10. No info about measuring points as far as i...

    No info about measuring points as far as i remember. Nevermind, I measured with sata and molex connectors via multimeter. :)
  11. Replies
    2
    Views
    856

    If your PC case has a place at the bottom of it...

    If your PC case has a place at the bottom of it for PSUs and the bottom place has holes for airflow, then just place your PSU to there. PSU air holes must face the pc case air holes so psu can intake...
  12. Finally I measured with multimeter. Software...

    Finally I measured with multimeter.
    Software shows 3.440v - 3.456v for idle mode and 3.424 V- 3.440V for full load.
    But my multimeter shows 3.39V - 3.40V for both situation. So, no problem with...
  13. Finally I measured voltages of the new PC which...

    Finally I measured voltages of the new PC which has Seasonic S12 620W.
    5v and 12v rails are again easy to measure from MOLEX. For 3.3V measuring, I used sata power connector again but in a different...
  14. I measured the voltages of my old PC. My old...

    I measured the voltages of my old PC. My old motherboard is ASUS NODUS M3. (AMD Athlon 64 x2 5000+ CPU) Here are the idle results:
    HWMonitor results:
    3.3V rail --> 3.264V - 3.298V
    5V rail -->...
  15. I just looked 15 pin SATA power connector. Pins...

    I just looked 15 pin SATA power connector. Pins are smaller than my probes. My DMM probe will touch 2 of them at the same time. Probably won't cause any trouble. First probe touch the first two 3.3V...
  16. I don't have any issues with the PC right now....

    I don't have any issues with the PC right now. All components are stable. Hmm, PSU is stable ? We'll see.
  17. Stefan hates S12, I know. :) Seems like...

    Stefan hates S12, I know. :)

    Seems like software reading results are lower than DMM measurement results, which gives me concern about 3.456V software reading. I hope I will not end with a very...
  18. If yours have user manual, you can look for the...

    If yours have user manual, you can look for the accuracy values.
  19. The Mosfets of my motherboard are also open to...

    The Mosfets of my motherboard are also open to discussion. Niko Mosfets oh. :(
    Hopefully I didn't need overclocking right now. And games generally doesn't use CPU above %50. So this mobo shouldn't...
  20. Let’s discuss about the quality of Seasonic S12 PSUs again.

    TL;DR --> Just go to the questions please if you don’t have time for reading the whole text.

    I built a new rig with completely new components 7-8 months ago.
    I’m a person with an investigative...
  21. :confused: I measured 3 different unused...

    :confused:

    I measured 3 different unused batteries. The result is the same. --> 1,6 V

    Used batteries have less voltage. That is why near-empty & used batteries can't power the circuits....
  22. Replies
    125
    Views
    15,166

    So, the "Tier 2" for S12 is true or not ?

    So, the "Tier 2" for S12 is true or not ?
  23. I looked the manual. For 20V DC measurement;...

    I looked the manual.

    For 20V DC measurement;
    Resolution: 10mV
    Accuracy: ± 0.5 % of rdg ± 1 digit
    ----------------------------------------

    For 2V DC measurement;
    Resolution: 1mV...
  24. Replies
    125
    Views
    15,166

    Fanboys banned you. I understand. :D

    Fanboys banned you. I understand. :D
  25. I'm sorry. I forgot to search it first... Thanks...

    I'm sorry. I forgot to search it first...
    Thanks for sharing the topics.



    Also multimeter itself is a problem. Probe wire thickness, probe wire length, resistors of the circuit, general...
Results 1 to 25 of 51
Page 1 of 3 1 2 3