jonnyGURU Forums

jonnyGURU Forums (http://www.jonnyguru.com/forums/index.php)
-   PC Power Supply Discussion (http://www.jonnyguru.com/forums/forumdisplay.php?f=3)
-   -   Enermax MaxRevo 1350W power supply review (http://www.jonnyguru.com/forums/showthread.php?t=8009)

jonnyGURU 05-30-2011 09:35 AM

Enermax MaxRevo 1350W power supply review
 
Happy Memorial Day....

http://www.jonnyguru.com/modules.php...Story&reid=241

Tator Tot 05-30-2011 09:59 AM

That Vreg was/is down right ugly.

I know it's a stupid question, but did you check to see if the pins of the modular cables were in well and tight?

I've had that issue on some fully modular units (SS X-650, Ultra x4 600) and not on others (ST75FP)

jonnyGURU 05-30-2011 11:22 AM

Yup. And I had multiple connectors plugged into the load tester, of course. The voltages reported were actually the highest of all of the voltage taking into account there would be some resistance.

From page 3:
Quote:

This power supply is supposed to have separate +12V rails, and I have the capability and will load each of these +12V rails. But I will only report the highest +12V voltage for each load as lower voltages can be blamed on the resistance in the cable or connectors.

Tator Tot 05-30-2011 11:39 AM

Wow... that's just rather ugly then.

Elledan 05-30-2011 01:32 PM

Yeah, nice PSU, but shame of the voltage regulation :(

Hondacity 05-30-2011 02:42 PM

the review was perfect

the psu, good layout, soldering nice, output ok

just something about that voltage regulation i don't like...

McSteel 05-30-2011 03:25 PM

Like I said, it's power is overrated a little. They should've released it as a platinum with a good v-reg instead of a gold with mediocre regulation...

jonnyGURU 05-30-2011 05:11 PM

It barely made Gold. Not sure how under-rating it will make it pass Platinum. It never came close to 92% efficient at any load.

Travis 05-31-2011 03:09 AM

I guess enermax released it in such a hurry that they don't have time to improve it.

Hunter315 06-01-2011 09:37 PM

Any chance we will be seeing the rotated board with other OEMs soon or is it just not a big enough advantage to justify a massive redesign?


All times are GMT -4. The time now is 02:16 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright © JonnyGURU.com 2000 -