PDA

View Full Version : Multiple Hard Drives on single feed.


Minerva
02-24-2007, 08:32 PM
Hey guys River Rat checking in. ;)

I have a system with 9 hard drives and found SATA clamp ons. So instead of having all this spaghetti wiring I want to install the SATA power connectors on ONE line from the PS. (Seasonic 700M) Will 8 raptor 150's and a Seagate 7200.10 be too much? The wire on the Seasonic is not very heavy gauge either.

jonnyGURU
02-24-2007, 09:55 PM
I would use two. I think 9 on one would be too much.

Minerva
02-28-2007, 06:21 PM
I would use two. I think 9 on one would be too much.

Ouch, I'm just going to leave things alone! Everything is working like a champ as it is. :)

This Seasonic is blowing warm air. The heatsink inside reads over 140F in one spot according to a recently calibrated infrared camera. :Q

As long as it doesn't BLOW UP (cough liberty) I'm ok.

Spectre
02-28-2007, 11:16 PM
Ouch, I'm just going to leave things alone! Everything is working like a champ as it is. :)

This Seasonic is blowing warm air. The heatsink inside reads over 140F in one spot according to a recently calibrated infrared camera. :Q

As long as it doesn't BLOW UP (cough liberty) I'm ok.

140F isn't that bad. I had a PSU that was exhausting at 72c(~162F)!